Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

isoflex nca 15

Homepage > products > kluber > isoflex nca 15
Categories
  • chemicals and solvents
    • ISOFLEX NCA 15
    ISOFLEX NCA 15
    ISOFLEX NCA 15

    isoflex nca 15

    Spindle bearing grease.

    ISOFLEX NCA 15 is a dynamically light grease with good pressure absorption properties for plain and spindle bearings. It consists of ester oil, synthetic hydrocarbon oil, mineral oil and special calcium soap. The product is resistant to water and protects reliably against wear.

    • ISOFLEX NCA 15 is particularly suitable for the lubrication of spindle and tapered roller bearings, threaded spindles, ball screws subject to high loads, and for all high-speed bearings, e.g. bearings in OEspinning turbines used in the textile industry.
    • The lubricant is applied by brush, spatula, grease gun or grease cartridge. Owing to the different compositions of elastomers and plastic materials, compatibility tests are indispensable before series application.
    • Longer rolling bearing life due to good wear protection, water resistance and pressure absorption capacity
    • Tried and tested over many years especially in high-speed and low-temperature applications
    • Low heating-up of bearings due to low lubricant friction leading to longer service life
    • Low running torque enables energy savings, particularly at low temperatures, hence costs savings possible
    Characteristics ISOFLEX NCA 15
    Article number  004180
    Composition, thickener calcium complex soap
    Composition, type of oil  ester oil , mineral oil
    Colour space beige
    Texture homogeneous , short fibrous
    Service temperature, lower limit -50 °C
    Service temperature, upper limit 120 °C
    Density, Klüber method: PN 024, 20°C approx 0.94 g/cm³
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 265 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 295 0.1 mm
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 3500 mPas
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 8000 mPas
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx 4.5 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx 21 mm²/s
    SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h ≤ 1 corrosion degree
    Low temperature torque, IP 186, -50°C, running torque ≤ 120 mNm
    Low temperature torque, IP 186, -50°C, starting torque ≤ 1000 mNm
    Dropping point, DIN ISO 2176 / IP 396 ≥ 180 °C
    Speed factor (n x dm) approx 1300000 mm/min
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months

     

    kluber-isoflex-nca-15.pdfkluber-isoflex-nca-15-en.pdf
    kluber-isoflex-nca-15.pdfkluber-isoflex-nca-15-en.pdf