ISOFLEX TOPAS AK 50

ISOFLEX TOPAS AK 50 is suitable for the lubrication of plain and rolling bearings operating at high and/or low temperatures. It can also be used in small gears and plastic/steel as well as plastic/plastic components. It is compatible with many thermoplastics.
The lubricant is applied by brush or conventional metering systems. Owing to the different compositions of elastomers and plastic materials, compatibility tests are indispensable before series application.

Characteristics	ISOFLEX TOPAS AK 50
Article number	004151
Composition, thickener	aluminium complex soap
Composition, type of oil	synthetic hydrocarbon oil
Colour space	yellow
Texture	homogeneous , short fibrous
Service temperature, lower limit	-50 °C
Service temperature, upper limit	120 °C
Density, Klüber method: PN 024, 20°C	approx. 0.87 g/cm³
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	355 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	385 0.1 mm
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit	1200 mPas
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit	1200 mPas
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	2000 mPas
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 5.9 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 30 mm²/s
SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h	≤ 1 corrosion degree
Dropping point, DIN ISO 2176 / IP 396	≥ 200 °C
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	24 months

kluber-isoflex-topas-ak-50.pdf

Name and Surname

Company Name

Your E-Mail Address

Your Telephone Number

Your Message

I have read and understood the Kvkk and Information Text.