Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

klubersynth ge 14

Homepage > products > kluber > klubersynth ge 14
Categories
  • chemicals and solvents
    • KLUBERSYNTH GE 14
    KLUBERSYNTH GE 14
    KLUBERSYNTH GE 14

    klubersynth ge 14

    Do you need to design small, grease-lubricated gearboxes that are both efficient and powerful? Does increasing power density pose an additional challenge? If so, you will probably also have to observe a wide service temperature range as well as excellent wear protection. Our special greases of the Klübersynth GE 14 series are the right solutions for such tasks. Based on our many years of experience, we have developed these speciality greases consisting of synthetic hydrocarbons, ester oil and an aluminium complex soap thickener. With their precisely tuned additives and the solid lubricants contained, the products offer excellent wear protection over a wide service temperature range.

    • Due to the excellent scuffing load strength and the good wear protection, the Klübersynth GE 14 series can be used for the lubrication of spur, bevel and planetary gears. The products are also suitable for lubricating rolling bearings, joints and slide rails performing oscillating movements, e.g. in power tools. Steel / steel, steel / aluminium and aluminium / aluminium material pairings are reliably protected against tribo-corrosion. Compatibility with seals has been proven in tests, which adds to operational reliability.
    • Excellent scuffing load strength and wear protection due to carefully selected additives
    • Reliable lubricant film formation in a wide service temperature range due to fully synthetic base oils
    • Excellent protection against tribo-corrosion due to good backflow behaviour
    • Reliable operation due to tested and proven compatibility with seals
    Characteristics  Klübersynth GE 14-110 Klübersynth GE 14-111 Klübersynth GE 14-112
    Article number 012328 012253 012358
    Composition solid lubricant solid lubricant solid lubricant
    Composition, thickener

    aluminium complex soap

    aluminium complex soap

    		 aluminium complex soap
    Composition, type of oil  ester oil , synthetic
    hydrocarbon oil    		 ester oil , synthetic
    hydrocarbon oil    		 ester oil , synthetic
    hydrocarbon oil
    Colour space yellow yellow yellow
    Texture fibrous, homogeneous ibrous, homogeneous ibrous, homogeneous
    Service temperature, lower limit -55 °C -55 °C -45 °C
    Service temperature, upper limit 140 °C 140 °C 140 °C
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit  360 0.1 mm  320 0.1 mm 280 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 390 0.1 mm 360 0.1 mm 320 0.1 mm
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹ approx. 2000 mPas approx. 3000 mPas approx. 5000 mPas
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 12 mm²/s approx. 16 mm²/s approx. 16 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 72 mm²/s approx. 110 mm²/s approx. 110 mm²/s
    Copper corrosion, DIN 51811, 24 h, 100°C 1 - 100 - 24 corrosion degree 1 - 100 - 24 corrosion degree 1 - 100 - 24 corrosion degree
    SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h ≤ 1 corrosion degree ≤ 1 corrosion degree ≤ 1 corrosion degree
    Flow pressure, DIN 51805-2, -45°C  -  - ≤ 1400 mbar
    Flow pressure, DIN 51805-2, -55°C ≤ 1400 mbar ≤ 1400 mbar  -
    Dropping point, DIN ISO 2176 / IP 396 ≥ 200 °C ≥ 200 °C ≥ 200 °C
    FAG FE9 rolling bearing test, DIN 51821-2, 1500 / 6000-140, service life F50 ≥ 100 h ≥ 100 h ≥ 100 h
    Four-ball tester, welding load, DIN 51350-4 ≥ 4000 N ≥ 4000 N ≥ 4000 N
    FZG scuffing test, DIN ISO 14635-3, A / 2.8 / 50, failure load stage > 12 > 12  -
    FZG wear test, DGMK 377-01, based on standard, C / 0.05:0.57 / room temperature / 12, wear category low low low
    Compatibility with elastomers, HNBR passed passed passed
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 12 months 24 months 24 months

     

    klubersynth-ge-14.pdf