Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

klubersynth li 44-22

Homepage > products > kluber > klubersynth li 44-22
Categories
  • chemicals and solvents
    • KLUBERSYNTH LI 44-22
    KLUBERSYNTH LI 44-22

    klubersynth li 44-22

    Synthetic low-temperature grease with good damping properties.

    Klübersynth LI 44-22 is a fully synthetic, dynamically light lowtemperature grease with good damping and adhesion properties as well as water resistance. It is based on synthetic hydrocarbons, lithium soap, antifriction solid lubricants as well as corrosion and oxidation inhibitors. Klübersynth LI 44-22 is almost neutral towards many plastics and elastomers.

    • Due to its excellent low-temperature and damping characteristics Klübersynth LI 44-22 is used in the precision engineering and automotive industry, e.g. for automatic locking systems, seat adjustment systems and small gears. Klübersynth LI 44-22 is particularly suitable for plastic/plastic and steel/ plastic material pairings. The product is approved according to the specifications VW-TL 778 B and Ford WSD-M1C234-A2.
    • Apply Klübersynth LI 44-22 by brush or spatula, or with conventional metering systems.
    1. Synthetic low-temperature grease with good damping properties
    2. Almost neutral towards many plastics
    3. Low friction coefficients
    4. Resistant to ageing
    5. Approved acc. to VW-TL 778 B and Ford WSD-M1C234-A2
    Characteristics Klübersynth LI 44-22
    Article number 004223
    Colour space beige
    Texture homogeneous , short fibrous
    Service temperature, lower limit -60 °C
    Service temperature, upper limit 130 °C
    Density, Klüber method: PN 024, 20°C approx. 0.9 g/cm³
    NLGI grade, DIN 51818 2
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit  265 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 295 0.1 mm
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 2500 mPas
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 5500 mPas
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 4 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 18 mm²/s
    Copper corrosion, DIN 51811, 24 h, 100°C 1 - 100 - 24 corrosion degree
    SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h ≤ 1 corrosion degree
    Flow pressure, DIN 51805-2, -35°C ≤ 450 mbar
    Flow pressure, DIN 51805-2, -60°C ≤ 1400 mbar
    Dropping point, DIN ISO 2176 / IP 396 ≥ 180 °C
    Oxidation stability, ASTM D942, 100 h, 99°C, pressure drop  ≤ 0.3 bar
    Water resistance, DIN 51807-1, 3 h, 90°C ≤ 1 - 90 rating
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 Ay

     

    klubersynth-li-44-22.pdfklubersynth-li-44-22-en.pdf
    klubersynth-li-44-22.pdfklubersynth-li-44-22-en.pdf