EN 
TR - Mainly drilling and deep hole drilling, but other applications including severe operations and high load properties as well. The extreme long tool life and surface finish reduces manufacturing costs and number of re-works.
Severity: Warning
Message: fopen(/tmp/ci_sessiontsndoil2rvc5sej0p0tg1a5qedtovsgc): Failed to open stream: No space left on device
Filename: drivers/Session_files_driver.php
Line Number: 176
Backtrace:
File: /www/buyonsell.com/httpdocs/application/core/MY_Controller.php
Line: 9
Function: __construct
File: /www/buyonsell.com/httpdocs/application/controllers/Index.php
Line: 22
Function: __construct
File: /www/buyonsell.com/httpdocs/index.php
Line: 315
Function: require_once
Severity: Warning
Message: session_start(): Failed to read session data: user (path: /tmp)
Filename: Session/Session.php
Line Number: 143
Backtrace:
File: /www/buyonsell.com/httpdocs/application/core/MY_Controller.php
Line: 9
Function: __construct
File: /www/buyonsell.com/httpdocs/application/controllers/Index.php
Line: 22
Function: __construct
File: /www/buyonsell.com/httpdocs/index.php
Line: 315
Function: require_once
Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.
Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye
Q8 Bach XNRG 15 is based on renewable esters which are readily biodegradable. Formulated as non-active neat cutting fluid, free from chlorine and suitable for the machining of a wide range of materials. These include cast iron, carbon steel, high alloy steels, stainless steel, heat resistant alloys, aluminium, copper and copper alloys. This synthetic product has a high flash point in comparison to mineral oil based products, which in combination with low foaming and the selected extreme performance additives, results in a human exposure friendly product with an extreme good oxidation stability.
| Method | Unit | Typical | |
| Appearance (Neat) | Visual | - | Bright and Clear |
| Density, 15 °C | D 4052 | g/ml | 0,873 |
| Density, 20 °C | D 4052 | g/ml | 0,873 |
| Kinematic Viscosity, 40 °C | D 445 | mm²/s | 15 |
| Kinematic Viscosity, 100 °C | D 445 | mm²/s | 4,0 |
| Pour Point | D 97 | °C | 21 |
| Flash Point, COC | D 97 | °C | 220 |
| Colour | D 1500 | - | 1.0 |
| Copper Strip, 3 h, 100 °C | D 130 | - | 1 |
| Four Ball Test, Weld Load | IP 239 | kg | > 800 |
*The figures above are not a specification. They are typical figures obtained within production tolerances.
