TR 
EN - Due to its soft consistency, CENTOPLEX CX 4/375 may be used in particular in small gears running at high speeds. An application example is a right angle grinder containing bevel gears. At temperatures <80 °C, long-term lubrication is feasible
Severity: Warning
Message: fopen(/tmp/ci_sessionkgcoevhp2gn2051kipujo47plvtdqgtl): Failed to open stream: No space left on device
Filename: drivers/Session_files_driver.php
Line Number: 176
Backtrace:
File: /www/buyonsell.com/httpdocs/application/core/MY_Controller.php
Line: 9
Function: __construct
File: /www/buyonsell.com/httpdocs/application/controllers/Index.php
Line: 22
Function: __construct
File: /www/buyonsell.com/httpdocs/index.php
Line: 315
Function: require_once
Severity: Warning
Message: session_start(): Failed to read session data: user (path: /tmp)
Filename: Session/Session.php
Line Number: 143
Backtrace:
File: /www/buyonsell.com/httpdocs/application/core/MY_Controller.php
Line: 9
Function: __construct
File: /www/buyonsell.com/httpdocs/application/controllers/Index.php
Line: 22
Function: __construct
File: /www/buyonsell.com/httpdocs/index.php
Line: 315
Function: require_once
Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.
Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye
High-speed gears require good oil supply already at low temperatures to reduce friction and wear. This is facilitated by CENTOPLEX CX 4/375 with its very soft consistency. In combination with the lithium soap thickener, the selected mineral oils support good backflow behaviour to optimise the required separation of the friction bodies.
Due to the good oil separation, good wetting of all moving friction points in the gearbox and the bearings can be attained.
| Characteristics | CENTOPLEX CX 4/375 |
| Article number | 020051 |
| Composition, thickene | lithium soap |
| Composition, type of oil | mineral oil |
| Appearance | almost transparent |
| Colour space | brown |
| Density, Klüber method: PN 024, 20°C | approx. 0.9 g/cm³ |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit | 365 0.1 mm |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit | 380 0.1 mm |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C | approx. 9.5 mm²/s |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C | approx. 110 mm²/s |
| Dropping point, DIN ISO 2176 / IP 396 | approx. 170 °C |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 24 months |
